Giá gọi 0905678759
Wifi Cisco C9100 Series C9105AXI-S;
C9115AXI-S; C9115AXE-S; C9120AXI-S;
C9120AXE-S; C9130AXI-S; C9800-L-C-K9;
C9800-L-F-K9; C9800L-RMNT=;
AIR-AP2802I-S-K9; AIR-AP3802E-S-K9
Cisco Catalyst 9105AX Wi-fi 6 Access Point C9105AXI-S Indoor environments, with internal antennas.
| Software | – Cisco Unified Wireless Network Software Release 8.10.MR3 or later – Cisco IOS XE Software Release 17.3.1, or later |
| Supported wireless LAN controllers | – Cisco Catalyst 9800 Series Wireless Controllers – Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities | – 2×2 MIMO with two spatial streams – Maximal Ratio Combining (MRC) – 802.11n and 802.11a/g – 20- and 40-MHz channels – PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) – Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) – 802.11 Dynamic Frequency Selection (DFS) – Cyclic Shift Diversity (CSD) support |
| 802.11ac | – 2×2 downlink MU-MIMO with two spatial streams – MRC – 802.11ac beamforming – 20-, 40-, 80- MHz channels – PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) – Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) – 802.11 DFS – CSD support – WPA3 support |
| 802.11ax | – 2×2 uplink/downlink MU-MIMO with two spatial streams – Uplink/downlink OFDMA – TWT – BSS coloring – MRC – 802.11ax beamforming – 20-, 40-, 80- channels – PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) – Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) – 802.11 DFS – CSD support – WPA3 support |
| Integrated antenna | – 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth – 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth |
| Interfaces | – 1x 10/100/1000 Base-T (Ethernet) Uplink Interface – Management console port (RJ-45) |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) | 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) |
| Weight | 0.7 lb. (329.5g) |
| Input power requirements | – 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®) – Cisco power injector, AIR-PWRINJ6= – 802.3af PoE – Cisco power injector, AIR-PWRINJ5= |
| PoE power | 802.3af (PoE) |
| Link speed | 1G |
| Environmental | – Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) – Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) – Operating temperature: 32° to 122°F (0° to 50°C) – Operating humidity: 10% to 90% (noncondensing) – Operating altitude test: 40˚C, 9843 ft.(3000 m) |
| Available transmit power settings (Max/Min) | – 2.4 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) – 5 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) |
Đánh giá
Chưa có đánh giá nào.